Auto Labelling Machine
Apply labels to bottles, boxes, and pouches — straight every time.
Three-roll bucket labelling machine — Wikimedia Commons
Manual labelling crews are slow, fatigue badly, and place labels crooked after a few hours. An auto labeller applies one or two labels per unit at 60–120 units a minute, with consistent placement and zero rework. Works for round bottles (wrap-around), flat boxes (top-and-side), or pouches (front-back).
Step by step
- 01
Product enters on a conveyor and triggers a photoelectric sensor.
- 02
A servo motor advances the label web; the peel-edge separates the label from its backing.
- 03
For round containers: a pinch roller spins the bottle while the label wipes on.
- 04
For flat surfaces: a sponge or brush press lays the label and smooths it.
- 05
A second sensor verifies presence; missing labels trigger a reject pusher.
- 06
Roll change takes under two minutes — operators load and re-thread without tools.
What's in the cell
- Servo label feed unit with peel plate
- Photoelectric trigger sensor
- Pinch roller (round) or wipe-down brush (flat)
- Conveyor with adjustable side guides
- PLC with batch counter and recipe memory
- Optional inkjet date/batch printer in-line
Where it fits
- PET water and beverage bottles
- Glass bottles for sauces, oils, condiments
- Pharma blister packs and vials
- Tea / coffee retail cartons
- Cosmetic tubes and jars
- E-commerce shipping cartons (top label)
Sized to your line
These ranges cover most installations — exact spec depends on your product, throughput target, and integration constraints. We confirm everything before quoting.
Bolts onto an existing conveyor or comes as a standalone with infeed/outfeed sections. We help size the label roll and tune the peel speed to your container.
Want this on your line?
Send us a quick note about your product, current throughput, and where it hurts. We'll come back within 48 hours with a sized proposal and a site-visit plan.
Other factory stations
See all 10
Vision Sorting System
Line-scan camera with air-jet ejectors removes off-spec product in milliseconds.
Delta Robot Pick & Place
High-speed parallel-arm robot picks items from a conveyor and places into trays at 60–150 picks/min.
Filling & Counting Station
Counts units into bags or boxes (or fills by weight/volume) and auto-stops when the target is reached.
Weight Check & Reject (Checkweigher)
Inline checkweigher verifies fill weight on every unit at line speed and ejects fails.